Want to build it yourself?
Skip the out-of-the-box Roobox and build it on your own tools. We give you dimensioned frame drawings and straight advice so you know exactly what you're doing before you cut anything.
NOT GOING OUT OF THE BOX?
Build your own golf simulator, right.
Not everyone wants an out-of-the-box simulator like our Roobox. Whether you're building it yourself, bringing in a tradesperson, or fitting out a golf sim centre that needs the right gear, we give you the drawings, the advice, and every part you need to get it done properly.
SKIPPING THE ROOBOX?
Three ways to build it your way.
Getting a tradesperson to build it?
Hand your tradesperson the frame drawings and we'll back them with the technical advice they need, correct enclosure dimensions, screen tensioning, mat placement and launch monitor positioning, sorted before they cut a single frame.
Building for a commercial space?
Add golf simulator studios to your build capability. We supply the technical drawings, structural specs and gear so you can quote and deliver commercial installs with confidence.
Frame drawings and build advice, free — when you buy your simulator supplies through us.
We're not just handing over a PDF and wishing you luck. Our team works with you on the actual dimensions of your space, then supplies the enclosure, screen, mat, launch monitor and everything else you need to build it, backed by our advice from day one to final swing.
WHAT WE PROVIDE
Everything between an empty room and your first swing.
-
01
Initial Consultation
A teams meeting to kick things off, we start by understanding your needs first, determine if we can acheive what you are after and go from there.
-
02
Build advice, start to finish
Straight answers on framing, screen tensioning, mat and turf placement, launch monitor mounting position, and lighting.
-
03
Custom frame drawings
Dimensioned enclosure drawings along with cutting list built around your space, bay width, ceiling height, screen distance and swing clearance all worked out for you.
-
04
Interactive 3D Model
A simple 3D Model of your space which you can drag, zoom and play with to help you visualise your room.
-
05
Every supply you need
Impact screens, hitting mats and turf, launch monitors, projectors, and simulator PCs sourced and supplied. Note: A purchase list of raw materials which are outside of our scope i.e. timber etc. will also be provided.
-
06
Ongoing technical support
Questions during the build don't stop after the drawings land. We're on hand as you go, not just at the sale. Whether that is with you or your tradesman.
Common questions
Custom and commercial golf simulator builds, answered.
Do I have to buy the frame timber from you?
No. Our frame drawings spec out the timber sizes so you can grab it from Bunnings or your local hardware store. We just don't chip out.
What size timber do I need for the enclosure frame?
It depends on your enclosure size, but as a guide, wall studs are typically MGP1090x45, 90x35 or 70x35, and roof joists are MGP10 140x45 or 190x45 depending on span. Your frame drawings will spec the exact sizes for your build.
Can you supply the hitting strip and putting turf as well, not just the frame?
Yes. We stock hitting mats and our own putting turf, and can help you work out sizing and layout for a DIY floor.
Will the hitting strip and putting turf sit flush with each other?
It depends on which products you go with, our Premium Tee Up Turf runs around 45mm with its foam backing, while putting turf sits around 15mm, so most builds pack the putting turf area out with foam tiles to match heights.
How long do the hitting mats last?
It varies a lot depending on your swing, how often you hit the exact same spot, and how long your sessions run. Moving your shot location around week to week will extend the life of the strip further.
Do you ship large items like screens and turf Australia-wide?
Yes, though freight on oversized items can add up. Depending on the product, warehouse pickup can be an option to save on shipping if you're able to get there with a ute or trailer.
Do you need to know what launch monitor I'm using before you draw up my frame?
Yes. Launch monitor type affects ceiling height and mounting position, so it's one of the first things we ask when putting your frame drawings together.
What's the actual difference using you guys and just building it myself off a YouTube video?
You get drawings built specifically for your space rather than a generic guide, plus ongoing advice from our team as you build, not just a set of plans and no support after that.
I already own a launch monitor and mat, can I still get frame drawings and just buy the enclosure gear?
Yes. Plenty of customers already have their launch monitor and mat sorted and just need the frame, screen and enclosure gear from us.
START YOUR BUILD
Tell us about your space. We'll tell you what it takes.
Get your free frame drawings and full build advice when you purchase your simulator supplies through Aussie Golf Sims.